Description
Utility quality three-phase power anywhere you need it.
Three-phase power from a single-phase source anywhere you need it. Phase Perfect® Enterprise digital phase converter uses modern solid-state electronics to create utility-quality three-phase power anywhere. Over 20 years of development has resulted in a robust and durable phase converter capable of powering any load, from hard-starting motors to equipment with delicate embedded electronics.Features / Advantages / Benefits
Power Quality
Hard-starting motors demand maximum output along with over-current protection. Delicate embedded electronics, which are getting more common by the day, demand perfectly balanced voltage always, no matter what the demands are on the rest of the system.
No other phase conversion technology can supply the brute force required to start the most demanding loads while protecting everything down to the smallest integrated circuit from damage. The Phase Perfect® uses modern microprocessor-controlled electronics to continuously adapt to changing conditions.
Don’t subject your expensive equipment to improper phase timing and voltage imbalance inherent in dated phase conversion technologies. Get utility-quality power with Phase Perfect®.
Maintains phase-to-phase voltage balance within 2%
IEEE 519 Compliance (Low Harmonics)
Electronic power factor correction produces near unity power factor
Sinusoidal input current with very low harmonic content
Output LC filter blocks digital switching-generated noise producing sinusoidal output
Efficiency
An embedded microprocessor constantly ramps up or down based on the needs of the attached equipment. Full power is there when you need it without any wasted energy when you don’t. High efficiency under load and extremely low power utilization when not loaded add up to big cost savings compared to other phase conversion technologies.
The Phase Perfect® will also return power to your single-phase source when any three-phase load is in generating mode. Returning this power and making your utility meter run backwards is a much more efficient solution than wasting any excess power by heating a resistor.
Woodworking or Machine Shop Energy Savings: $305.20/year
| Phase Perfect® | Rotary Converter | |
|---|---|---|
| Starting Load Horsepower | 20 HP | 40 HP |
| Standby Power Consumption | 80W | 2260W |
| Idle Power Cost | $11.20 | $316.40 |
Woodworking or Machine Shop: Results are based on 4 hours of idle/non-operating time per day, 5 days per week, 50 weeks per year, at an electric rate of $0.14 per kw/hr.
Elevator Energy Savings: $1,432.82/year
| Phase Perfect® | Rotary Converter | |
|---|---|---|
| Starting Load Horsepower | 10 HP | 20 HP |
| Standby Power Consumption | 80W | 1350W |
| Idle Power Cost | $89.69 | $1,513.51 |
Elevator: Results are based 22 hours idle/non-operating time per day, with the elevator ready for operation 24/7, at an electric rate of $0.14 per kw/hr.
Durability
Phase Perfect®’s have been powering equipment outdoors in the harshest of conditions for over 20 years. The brownouts, outages, and surges in remote areas that see frequent blizzards, lightning storms, and other severe weather has helped our engineers harden the Phase Perfect® into a highly reliable product.
The electronics have been made extremely robust, including the addition of costly film type line filter capacitors and custom inductors. The chassis has a NEMA 3R outdoor rating, so you can mount it anywhere without worry. The onboard software has also been continually upgraded with advanced monitoring and protections to help keep the Phase Perfect® and your expensive equipment safe.
Voltage Doubling
The Phase Perfect® Enterprise models are available in a voltage doubling configuration. If your application requires 460V power but you only have a 230V supply, these models will double your supply voltage without requiring a transformer.
Convenience
- Mount with supplied mounting kit.
- Connect two wires in, three wires out.
- Ensure the Phase Perfect® Enterprise is well grounded.
Installation of a Phase Perfect® Enterprise is virtually “plug-and-play”. Equipment or a three-phase load center can be connected to the output just like they would be hooked up to utility three-phase.
Application and Uses
A huge number of applications and equipment once considered “industrial” require three-phase power. This equipment is increasingly finding use on farms and ranches, in home shops, or other locations where utility-provided 3-phase isn’t readily available.
Modern electronic safety features are showing up everywhere, and internet-connected equipment is becoming commonplace. Equipment with embedded electronics is highly sensitive to power quality, and some methods of phase conversion will damage these electronics. A Phase Perfect® will ensure any equipment runs just like it was connected to three-phase from the power company.
Common uses for the Phase Perfect® Enterprise: Elevators, HVAC, Wineries, Irrigation, Woodworking, Machine Shops, CNC Equipment, Polishing & Grinding
